INSTALLATION AND OPERATION INSTRUCTIONS FOR 2939-TRU-VIEW-XL SAFETY INFORMATION WARNING For your safety, always comply with all warnings and safety instructions contained in this manual to prevent personal injury or property damage. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this appliance. INSTALLER: LEAVE OWNER’S MANUAL WITH THE APPLIANCE. CONSUMER: RETAIN OWNER’S MANUAL FOR FUTURE REFERENCE.
Please read and carefully follow all of the instruction found in this manual. Please pay special attention to the safety instructions provided in this manual. The instructions included here will assure that you have many years of dependable and enjoyable service from your Amantii product. Table of Contents IMPORTANT INSTRUCTIONS ............................................................................................................................. 3 PLUG INSTALLATION ..................................
IMPORTANT INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. Do not operate appliance before reading and understanding operating instructions. Failure to operate appliance according to operating instructions could cause fire or injury. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet from the front of the heater; keep them away from sides and rear as well.
Your power cord will come separate from the unit, please locate it when unpacking your fireplace. The plug contained inside the box is predetermined at the factory and according to orders placed by authorized dealers. Available are UK, European, Swiss & Australian plugs. Should you require any of these options please contact your dealer for purchase. You will be required to give them the correct part number as listed below.
UNPACKING AND TESTING APPLIANCE Carefully remove the appliance from the box. Prior to installing the appliance, test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located 240 Volt grounded outlet. Test all aspects of its operation (manual switches, remote and heater) to make sure all components operate correctly. As with most electronic devices, your new electric fireplace has been designed to operate at temperatures between 5 ℃ (41℉) and 35 ℃ (95℉).
2939-TRU-VIEW-XL Description Voltage Watts NO HEATER MOTOR HEATER Appliance Width Appliance Height Appliance Depth Gross Weight Plug Location Cord Length Rough Wall Opening Size BTU ELECTRIC FIREPLACE 240V AC 50-60Hz 1900W Max 22W 19W 29 1/2" 39 1/4" 11 3/4" 92.
2939-TRU-VIEW-XL Description Voltage Watts NO HEATER MOTOR HEATER Appliance Width Appliance Height Appliance Depth Gross Weight Plug Location Cord Length Rough Wall Opening Size BTU ELECTRIC FIREPLACE 240V AC 50-60Hz 1900W Max 22W 19W 75 cm 99.6 cm 30 cm 42 kgs Left side 180 cm 76.27 x 100.87 cm 6500 735.
INSTALLATION WALL-MOUNT NOTE: Due to variables in installation location and materials, it is highly recommended that you consult your local builder before you install this appliance. 1. Select a location that is not prone to moisture and is located at least 0.91 m or 3 feet away from combustible materials such as curtains or drapes, furniture, bedding, paper, etc. 2. Select a suitable position in which to mount the heater horizontally – use a spirit level to achieve this (Fig. 1). Fig. 2 3.
INSTALLATION BUILT-IN 1. Carefully remove the appliance from the box. Prior to installation, test to make sure the fireplace operates properly. 2. Get the bracket and framing from the parts kit, and screw them to the fireplace as shows below.
3. Use the brackets you used in Step 2 to fix the completed mantel to the fireplace. 4. After checking that the fireplace operates properly, you may now decorate the surrounding area with a finish of your choice.
MEDIA OPTIONS Your fireplace ships with a 10 piece Birch Log Set, two (2) bags of Smoke Glass, one (1) bag of Black Vermiculite and one (1) bag of White Vermiculite. SMOKE GLASS STEP 3: Remove the front glass panel to decorate your fireplace. Pour the decorative media into the tray. Feel free to use any combination of fire glass media that you find most appealing. VERMICULITE 10-PIECE BIRCH LOG SET MEDIA INSTALLATION STEP 1: Unplug the unit and make sure controls are switched off.
OPERATION The fireplace can be operated either by the switches located on the left bottom of the fireplace unit or by supplied remote control. Plug the fireplace into a 15 Amp wall socket. MANUAL OPERATION 1! Press key . Press for the first time"heater work at 1900W, indicator Press for the second time, heater work at 950W"indicator lights red. lights blue. Press for the third time, the heating element turns off, indicator extinguishes.
REMOTE CONTROL OPERATION 1 2 3 1 Press the remote control’s key“ ”, its screen turns on, the flame ignites and the flame icon appears on the LCD screen of the remote control. Week, time (24h system), and temperature setting are displayed normally. Press it again, the screen of the remote control will turn off; 2 Key“ ”, flame and charcoal control switch. In case of ON, press once, the flame and the charcoal bed go out, the LCD screen does not display the LCD screen displays . .
7!Press the heating key“ .” Press for the first time ,the heating elements work at 1900W, the LCD screen displays , the indicator on the machine lights red. Press a second time , the heating elements work at 950W, the LCD screen displays , the indicator on the machine lights blue. Press a third time and the heating elements turn off, the LCD screen does not display the function icon, the indicator on the machine goes off.
for Tuesday. Press for the 7th time and it displays . Press for the 8th time and it exits and recovers to the current week day; 11!Press“ displays .” Press for the first time and the timing function turns on, the LCD screen , the machine’s indicator on the LCD screen lights green. Press again to turn off, icon goes off. After the timing function is turned on, it works according the parameter settings.
REPLACEMENT PARTS This list contains replacement parts NO. PART NUMBER DESCRIPTION FRONT CLEAR GLASS (MIDDLE) QTY.
EXPLODED VIEW 19
Wiring Diagram 20
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Dim or no flame Flame LED’s are burnt out. Inspect the LED’s and replace them if necessary. Change a flicker and back black cloth. Back black cloth is falling off and rolled up in the flicker. not Ember LED’s are burnt out Ember bed is glowing or dimming Appliance turns off and will not turn on Inspect the ember bed LED’s and replace them if necessary.
SERVICE HISTORY This heater must be serviced annually depending on usage.
WARRANTY FOR PRODUCTS MANUFACTURED AFTER JANUARY 1st, 2016 Amantii Imports Corp. ("Amantii " ) warrants that your newly purchased Amantii electric fireplace is free from manufacturing and material defects for a period of two (2) years from the date of the first purchase, subject to the conditions and limitations contained below.
