Installation and Operation Guide

5-12 TS-3000i Web Clock Installation & Operation Guide
Figure 5-13: Manual Discovery Download
Step 2. Browse to select the clock “ATVSConfig.bin”” file using the
Windows Open dialog (see Figure 5-12).
Step 3. Click on the
button to download the clock
configuration file to the selected clock(s) in the list that was
manually created. Click “Select All Clocks” (the default) to
select/deselect all discovered clocks, or click on each desired
clock.
Note – Amano recommends performing a Backup from the
built-in clock Backup Utility before performing any clock
firmware updates. FAILURE to do this could result in loss of
clock configuration and/or the transaction database!
Note – If updating clock firmware, click on the
button after browsing to and selecting a clock firmware file.
ONLY PERFORM this function if Amano recommended. When
performing a firmware update, the file would have an “image.bin”
name and probably be stored in a different location. Otherwise,
this function is not normally used.
Operation status displayed here