Installation and Operation Guide

TS-3000i Web Clock Installation & Operation Guide 5-11
Figure 5-12: Windows Open Dialog
Step 3. Once you have located the original configuration file, click on
the now active
button to download the
clock configuration file to the selected clock(s).
Note – Amano recommends performing a Backup from the
built-in clock Backup Utility before performing any clock
firmware updates. FAILURE to do this could result in loss of
clock configuration and/or the transaction database!
Note – If updating clock firmware, click on the
button after browsing to and selecting a clock firmware file.
ONLY PERFORM this function if Amano recommended. When
performing a firmware update, the file would have an “image.bin”
name and probably be stored in a different location. Otherwise,
this function is not normally used.
Manual Discovery Procedure for download:
Step 1. With the Advanced options  Download open, click on View
 Advanced options  Manual discovery to enter the IP
Address for the desired clock, and press the
button
to add the clock to the list of TS-3000i clocks (see Figure
5-13). Use this same procedure to manually add other
TS-3000i clocks to the list.