Installation and Operation Guide

5-10 TS-3000i Web Clock Installation & Operation Guide
Figure 5-11: Auto Discovery Download
Step 3. Browse to select the shared clock file using the Windows Open
dialog (see Figure 5-12). For example, this file could be a
configuration file labeled “ATVSConfig.bin” and in this
example, this file was previously created as a shared
configuration file using the clock Backup Utility (see Chapter 4:
Utility Settings for FTP Server). This “ATVSConfig.bin” file was
created from a TS-3000i clock that was already configured via
the web interface. In effect, what this utility is allowing you to
do is to replicate the configuration of a previously configured
clock to multiple clocks through the Update Configuration
function.
Look – This file should be stored on the FTP Server which was
configured in the Utilities Settings for the TS-3000i clock
(see Chapter 4: Utility Settings for FTP Server).
Operation status will be displayed here
Click on desired clock(s)
Browse to
ATVSConfig
(.bin) file
stored on FTP
server