Installation and Operation Guide

4-34 TS-3000i Web Clock Installation & Operation Guide
Figure 4-26: Restore Utility
Step 4. Click on the button to perform the file
restoration in the clock and the restoration status will be
displayed once the operation has been completed, i.e.,
“Successfully restored configuration from file 36-b0-
4d_ATVSConfig.bin.”
Note – The restore utility is recommended to be used when
the clock has been reset to factory default settings. It can also
be used to copy the configuration settings from one clock to a
single clock. Amano recommends using the TS-3000i Utility for
Updating the configuration of multiple clocks.
The error message “Can’t open FTP connection” will appear
if an FTP Server cannot be detected, i.e., has not been setup
in the Utility Settings.