Installation and Operation Guide

TS-3000i Web Clock Installation & Operation Guide 4-23
Figure 4-18 E-Mail Settings for Report & Backup Events
Step 16. Select to receive e-mail notification for the status of running a
scheduled backup and/or transaction report by clicking in the
box alongside the selection.
Step 17. Enter the desired Message(s) (maximum length is 100
characters for each message) to be sent to the e-mail
recipient(s). This can be any message you want sent for that
event.
Step 18. Click the
button to save the e-mail Report & Backup
events settings.
SNMP Trap Setup
Simple Network Management Protocol (SNMP) is used in network
management systems to monitor network-attached devices for conditions
that warrant administrative attention either on-site or remotely. A network
administrator can use SNMP to monitor the availability-performance-
error rates either on-site or remotely over a network, which facilitates
central clock management.