Installation and Operation Guide

4-16 TS-3000i Web Clock Installation & Operation Guide

Time Server Setup

Step 1. Click on the Time Servers link under Time Sync, and the

Time Server List screen will appear (see Figure 4-12). The

TS-3000i Web Clock provides 18 default Stratum 1 NTP

servers for the user. Additionally, the user can add up to 14

additional time servers for a total of 32 time servers. The user

can not delete any of the 18 predefined time servers, but any

user created time server can be deleted. The time server order

signifies the order that they will be tried for time

synchronization, i.e., number 1, then number 2, etc.

Step 2. To change the time server priority order, highlight the desired

time server in the list, and click the

buttons to change the time server order. The

time server order controls the order that the enabled time

servers will be used to validate the time at the clock. The first

time server with a successful time sync is the one used. The

next time server in the list will only be used upon failure to time

sync within the 1-3 programmed sync attempts with the

previous time server.

Figure 4-12: Time Server List

Step 3. Highlight the desired time server in the list, and click on the

, or buttons to modify or delete an existing time

server.

To change position

for order of use.

To Add, Edit and

Delete Time Servers.