Installation and Operation Guide

TS-3000i Web Clock Installation & Operation Guide 4-15
Figure 4-11: Time Sync Settings
Step 4. Enter the Sync Retry Attempts: (the default & maximum = 3).
This is the # of times that any time server would be tried if time
synchronization fails.
Step 5. Select “Ignore Deviation Error” option for the maximum
deviation (absolute difference between clock time and NTP
time) to be ignored and the clock time set to the NTP Time
Server during time synchronization. If not checked (default),
and the previous condition occurs, the clock will not be set to
that Time Server.
And
Select “Send e-mail and/or SNMP trap notification if it
completely fails to set the time” If checked, and time
synchronization fails, a message would not be sent until all
enabled time servers have been tried. If not checked, a
message will be sent every time a time synchronization failure
occurs, which is the default.