Installation and Operation Guide

TS-3000i Web Clock Installation & Operation Guide 4-9
Step 10. Select Enable Zero Configuration (default) for Zero
Configuration to obtain the parameters necessary for operation
in an Internet Protocol
network at a local level. This is where
you would turn Zero Configuration off if you did not want the
clock to broadcast its location. The most direct way to get to
the clock when this function is disabled is to know the IP
address.
Step 11. When finished entering the network settings, click on the
button to save network settings for the clock.
How to Set the Print Options
Step 1. Click on the General Settings link under Print, and the Print
General Settings screen will appear (see Figure 4-6).
Step 2. Select the Minute Format from the dropdown menu (default =
60
th
). An example of this would be: if the actual time is 16:30
(4:30PM), 10
th
= 16.5, 20
th
= 16.50, 60
th
= 16:30, and
100
th
= 16.50.
Figure 4-6: Print General Settings
Step 3. Select the Dual Print, On or Off. This determines whether you
print one line (Line 1) or both lines (Line 1 & Line 2). When
Dual Print is turned On (default = Off), and the print method is
set to Paper Detect Only (P) (see Figure 2-17) two different
print styles (lines) can be printed sequentially, without having
to push the auxiliary Symbol Print Bar.