Installation and Operation Guide

4-8 TS-3000i Web Clock Installation & Operation Guide
Figure 4-5: Network Clock Settings
Step 8. Select to Use DHCP (Dynamic Host Configuration Protocol)
which is a protocol used by networked devices (clients) to
obtain the parameters necessary for operation in an Internet
Protocol network. This is the default.
Or
Select Use Fixed IP Address when desiring to use a static IP
address, and enter the following:
 Fixed IP address for the Web Clock
. Obtained from
network administrator.
 Subnet Mask for the Web Clock
. Obtained from network
administrator. In computer networks based on the Internet
Protocol Suite, a subnetwork, or subnet, is a portion of
the network's computers and network devices that have a
common, designated IP address routing prefix.
 Default Gateway for the Web Clock
. May have to obtain
from network administrator. A default gateway is a node
(a router) on a computer network that serves as an access
point to another network.
Step 9. Select Service Port (default = 7) for the TS-3000i’s built-in
TCP service that allows a user to initiate an operation from an
external application (i.e., the TS-3000i Utility functions). Any
unreserved port 1 thru 65535 can be used.