Installation and Operation Guide

TS-3000i Web Clock Installation & Operation Guide 2-17
Figure 2-17: TS-3000i Printer Adjustment
Available Print Methods
There are three different Print Methods available. The default Print
Method is for Paper Detect Only (P.). If you wish to change the default
Print Method, locate the Print Method Selector on the bottom of the
machine (see Figure 2-17) and move it to the desired position.
The settings are:
 P. - Paper Detect Only: This setting will disable the Print Bar and
automatically print when media is inserted into the TS-3000i Web
Clock and contacts the print margin (Paper Sensor). For this
method, you must set a desired print margin using the Margin
Selector.
 S.P. - Paper Detect & Print Switch: This Print Method is for manual
printing when the alignment of the imprint on your document is
critical. For this method, you must set a desired print margin using
the Margin Selector. To print, insert media into the TS-3000i Web
Clock until it contacts the print margin, and press the Print Bar.