Installation and Operation Guide

TS-3000i Web Clock Installation & Operation Guide 2-3
Installing the Optional FPR
Step 1. Disconnect the clock AC adapter from the power outlet.
Warning! – Failure to do so could result in a hazardous shock.
Step 2. Insert the key, turn the key clockwise, and remove the upper
cover of the TS-3000i (see Figure 2-2).
Step 3. Remove one small Phillips head retaining screw from the right
and left front sides of the top plate (see Figure 2-4).
Figure 2-4: Top Plate Removal
Step 4. Disconnect the Ethernet cable at the RJ-45 network connector
(see Figure 2-7). You DO NOT have to remove the cable from
under the wall mounting plate on the back – just disconnect it
at the RJ-45 connector
.