Installation and Operation Guide

2-2 TS-3000i Web Clock Installation & Operation Guide
Removing the Cover
Insert and turn the key clockwise to remove the upper cover. Note – the
upper cover must be removed to change the ribbon and access the reset
button (see Chapter 7, How to Replace the Ribbon).
Figure 2-2: TS-3000i Web Clock Cover Removal
Unpacking the Clock
After removing the upper cover, lift up the Printer Block (A) and remove
the Packaging Spacer (B).
Figure 2-3: TS-3000i Web Clock Packaging
Note the serial number which can be found on the bottom of your clock
and write this number in the space provided in the Warranty paragraph of
this manual on page 1-7 for future reference.