Installation and Operation Guide

TS-3000i Web Clock Installation & Operation Guide 9-9
FAQ-26. If I have additional questions on the clock and require
more information, where do I go?
 Call Amano Support: at 1-800-896-7035 or e-mail
[e-mail] .
 For clock accessories such as: ribbons, time cards, FPR &
PoE call: 1-800-253-9836 or e-mail [e-mail]
 For more TS-3000i information visit www.amano.com/time
FAQ-27. How do I configure clocks for “Wide Area Service
Discovery” so that they can be found from multiple US
locations?
 Go to the “DNS Server” page on the web interface of the
clock.
 Change the domain name from “local” to the domain of your
network. (for example “apple.com” or “dns-sd.org”)
 Enter your DNS server’s IP address for one of the DNS
servers.
 Press the “Save” button and wait 1-2 minutes for the clock to
register its service in the DNS server.
Note – Make sure your DNS server is setup to allow the
non-secured dynamic updates. Please visit
www.dns-
sd.org
to get more information about how to setup DNS
severs for Wide Area Service Discovery.
FAQ-28. I have configured clocks at different US locations for
“Wide Area Service Discovery”. How do I find them from
one US location?
 Install the TS-3000i utility that came on the CD and open it.
 Click on the “Settings” tab, and change the domain name
from “local” to the domain name of your network. (for
example “apple.com” or “dns-sd.org”).
 Press the “Start”
button to begin searching for clocks in
your network domain.
 Press the “End”
button to stop searching or the utility
will stop automatically after timeout.
 The clocks that were found in your network domain will
appear in the list.