Installation and Operation Guide
TS-3000i Web Clock Installation & Operation Guide 9-7
Use the Scheduling function to setup a Backup schedule
to create regular backups.
FAQ-21. How do I Backup a configuration file for multiple clocks?
Select the Backup/Restore Utility from the browser and select
“Configuration” from the dropdown menu. Next, click Shared
for the question, “Is this backup file going to be shared to
multiple clocks?” Press the
button, and the
status box will display the active status, “Backup is running”
followed by “Successful”.
Consult this Installation and Operation Guide, see Chapter
4 for details on how to create the “ATVSConfig” file.
Consult the Installation and Operation Guide, see Chapter
5 for directions on how to use the TS-3000i Utility with a
shared Backup file
for Update Configuration function.
FAQ-22. How do I Restore a configuration file on a single clock?
Select the Backup/Restore Utility from the browser and select
“Configuration” from the dropdown menu. Next, click Specific
for the question, “Are you restoring this clock based on shared
settings or is it specific to this clock only?” Press the
button, and the status box will display the
active status, “Restore is running” followed by “Successful”.
Also, Amano recommends that you can use the TS-3000i
Utility with the shared “ATVSConfig” file was created, by using
the download function in the TS-3000i Utility that came with
your clock to download this configuration to another clock.
Consult the Installation and Operation Guide, Chapter 4.
FAQ-23. How do I Restore a configuration file for multiple clocks?
Open the TS-3000i Utility and use the Auto Discovery or
Manual Discovery to generate a list of clocks. Select the
desired clocks to update on the clock list.
Next, click on the View menu and select Advanced settings.
Browse to the previously created shared “ATVSConfig.bin” file
and press the
button. The TS-3000i
Utility can be used to replicate a clocks configuration to
multiple clocks, thus ensuring that each clock has the exact
same setup.