Installation and Operation Guide

9-4 TS-3000i Web Clock Installation & Operation Guide
FAQ-6. Where are all my report and/or configuration files from my
TS-3000i Web Clock stored? What is the file format of the
report and configuration files? All of your report
(transaction) and configuration files can be stored on the FTP
server configured in the Utility Settings. The transaction files
are text files and can be imported into Excel and combined
with other clocks to be viewed as a clock/site report. Note – a
transaction file for a specific clock CANNOT be restored to
multiple clocks. However, the configuration files are binary and
can be used to clone the configuration of a single clock to
multiple clocks using the TS-3000i Utility.
Note – you must have the FTP server configured in order to
backup the reports and configuration files.
FAQ-7. Do I require any special cables to connect the TS-3000i?
No – The Amano TS-3000i comes with a 10 ft. CAT5 cable
which has a RJ-45 connector on the end for network
connection (see the following figure). It is recommended to use
a RJ45 female-to-female coupler for cable extension.
FAQ-8. If I do not require centralized reporting, do I still need to
install software to use the TS-3000i Web Clock? No. No
software-No server-No central management = Minimal IT staff
involvement. However, Amano recommends installing the
Utility that came on the CD with your clock for auto discovery
and advanced functions.