Installation and Operation Guide

TS-3000i Web Clock Installation & Operation Guide 9-1
Chapter 9: TS-3000i FAQs
FAQ-1. How do I find and connect to my TS-3000i Web Clock
using the auto discovery Zero Configuration Protocol?
 Amano recommends to install and run the TS-3000i Utility
that came on the CD with your clock. See Chapter 5 of this
Guide.
 Consult the Quick Start Guide that came with your clock.
 Consult the Installation and Operation Guide, see Chapter
3 - Quick-Start for how to use Internet Explorer with
Bonjour plug-in installed, Safari browser with built-in
Bonjour, and Firefox browser with TS-3000i Utility.
 Visit www.amano.com/time
for additional support.
FAQ-2. How do I find my TS-3000i Web Clock if my browser does
not support the Bonjour plug-in, or I do not want to use
the auto discovery Zero Configuration Protocol?
 Install and open the TS-3000i Utility provided on the CD
that came with your clock.
 Consult the Quick Start Guide that came with your clock.
 Visit www.amano.com/time
for additional support.
FAQ-3. How do I incorporate my new TS-3000i Web Clock into my
current Amano setup? I currently have one of the
following set-ups:
Customer A Scenario: Has Amano PIXCOMW software and
PIX-3000xN clocks.
 The new TS-3000i clock can be added to the existing
PIX-3000xN clocks. The TS-3000i requires an Ethernet
connection for the PIXCOMW software to communicate
with it. However, the PIXCOMW software does not support
all the new features of the TS-3000i. The TS-3000i offers
Zero Configuration technology which provides easy setup
and clock communications by not requiring known IP
addresses. It is recommended that you upgrade to the
latest ATVS Enterprise software to take advantage of
these features.