Installation and Operation Guide

TS-3000i Web Clock Installation & Operation Guide 8-3
Wide Area Clock Discovery
If the TS-3000i clocks are configured for Wide Area Service Discovery,
they can be discovered and managed remotely from any PC connected
to the Wide Area Network.
To discover and manage the clocks, use the following procedure:
Step 1. Install and open the TS-3000i Utility that came on the CD
included with the clock. The default factory setting on the utility
is to discover the clocks in a Local Area Network.
Step 2. From the main menu, click on the View menu and select the
submenu Settings. The Settings and Manual Download tabs
will appear on the top of the list.
Step 3. In the Domain Name field, enter the domain name of your
network and press the Red Arrow
button to load the
Domain Name in the list on the right for discovery of all clocks
in your companywide domain (see Figure 8-3). For example,
the domain name of your companywide network might be
“abc.net”.
Figure 8-3: Settings
Step 4. Select the desired domains in the “List of domains to browse”
or click on “Select All domain(s).