Installation and Operation Guide

7-12 TS-3000i Web Clock Installation & Operation Guide
Extending the Ribbon Life
The TS-3000i Web Clock has a ribbon life extender lever, which will
prolong the use of the ribbon until it can be replaced.
To activate the extender:
Step 1. Remove the cover.
Step 2. Grasp lever "A" and pull until
the ribbon moves outward.
Step 3. Check print quality. If print did
not improve, the ribbon needs
to be replaced (see How to
Replace the Ribbon).
Step 4. If installing a new ribbon, make
sure this lever is pushed in before using.
Note: There is no ribbon life counter which shows the remaining ribbon
life. However, the ribbon cartridge generally has a life span of
approximately 6,000 print cycles.
The Amano Part numbers for TS-3000i Ribbon Cartridges are:
 Black ink CE-315151
 Green ink YK-629771
 Red ink YK-629671
When ordering parts and/or accessories, be sure to include your
TS-3000i model number and the serial number which is located on the
bottom of the clock.