Installation and Operation Guide

7-4 TS-3000i Web Clock Installation & Operation Guide
Step 2. Press the button to test the clock LCD
display by lighting all the segments/symbols on the clock LCD
(see Figure 7-4). This allows the user to verify that all
segments and symbols work. After the LCD test is invoked, if
desired, press the
to manually terminate the
test. The test will automatically terminate after 15 seconds.
Figure 7-4: LCD Test Display
How to Reset the Clock
Step 1. Click on the Diagnostics link under Clock, and the Clock
Diagnostics screen will appear. Then click on the Reset tab
and the Reset screen will appear (see Figure 7-5).
Figure 7-5: Clock Reset
Status Area
Information