Installation and Operation Guide

TS-3000i Web Clock Installation & Operation Guide 6-5
Step 3. This step is optional and should usually be skipped. Only
perform this step if having problems with auto discovery.
Please note - the screen has changed (see Figure 6-4) to
allow Domain Name change for the search (default = local).
Also, you can select the timeout time allowed for the search
from the dropdown (default = 1 minute).
Note – If default values are ok, just select TS-3000i and click
on the Import tab (Step 4).
Figure 6-4: Normal Import TS-3000i Settings
Step 4. Click on the Import tab to display a blank Import Devices
screen. Click on the Start Discovery
button. To stop auto
discovery, simply click on the End Discovery
button.
Searching for the clocks will automatically timeout.
Step 5. All of the discovered TS-3000i clocks will be displayed in a list
with their Device Type, IP Address, MAC Address, Device
Name, and Group Name.