Installation and Operation Guide

6-4 TS-3000i Web Clock Installation & Operation Guide
Discovering & Importing TS-3000i Clocks into ATVS
The following procedure assumes that the user has some knowledge of
ATVS Enterprise software operation. Also, this procedure only details
discovering and importing TS-3000i clocks. For complete details on all
ATVS features and any information about discovering PIX-3000xNT
clocks with DeviceInstaller (Lantronix utility) please consult the ATVS
Installation and Operation Guide.
Step 1. Start the ATVS software and login with your ATVS Username
and Password (different than the clock login!).
From the main
ATVS Config screen, click on the Tools menu, and select the
Import Devices sub-menu (see Figure 6-2) to launch the
Import Devices screen. This is the easiest and most direct
method for finding and importing TS-3000i clocks into ATVS.
Figure 6-2: Import Devices
Step 2. From the Import Devices screen select TS-3000i from the
dropdown menu for the type of device to import
(see Figure 6-3).
Figure 6-3: Select Device Type