Installation and Operation Guide

TS-3000i Web Clock Installation & Operation Guide 6-3
 Time server setup. As soon as ATVS syncs the TS-3000i, the
Sync Type on the Time Sync Settings screen will automatically
be changed to ATVS Software Sync.
 Time synchronization schedules (same schedules run on all
clocks as ATVS is the master). The schedules in the TS-3000i
will not be used because ATVS is now the master for all time
synchronization.
 All reporting (transactions, devices, schedules, and status).
ATVS provides a master database.
 SNMP Trap setup for enhanced network monitoring.
 E-mail notification.
However, the following functions will still need to be setup at the clock
if
you do not want to just use the default settings:
 User Settings – log in name and password.
 Clock Settings – LCD display, and network settings for
discovery.
 Clock Information – clock name and description. The clock name
will be imported when the clock is added to ATVS.
 Print General Settings – all general print settings need to be
defined.
 Print Lines 1 & 2 – Each clock could have its own print setup if
desired, or just ignore and use default.
 DNS Server Settings – need to be modified if default settings are
not acceptable.
 Utility Settings – FTP Server setup, and Backup/Restore
function.
For more detailed information on ATVS Enterprise software operation
see the ATVS Installation and Operation Guide (Amano part No. AJR-
40120X).
Note – Default communication port for TS-3000i = 7. It can be
changed, but a global setting value needs to be applied to all
clocks.