Installation and Operation Guide

6-2 TS-3000i Web Clock Installation & Operation Guide
 Central Time Synchronization control for TS-3000i, PIX-3000xN
and/or PIX-3000xNT clocks.
 Central scheduling of Time Sync for selected group, or selected
clocks connected to ATVS.
 Central control of SNMP Trap alerts for enhanced network
monitoring of all ATVS connected clocks.
 Run consolidated report for Time Sync transactions, device,
schedule, status, and time server information for all clocks
connected to ATVS.
Using ATVS with the TS-3000i
The ATVS Enterprise software will function the same way with the
TS-3000i as it does with the Amano PIX-3000xN and PIX-3000xNT
clocks. The TS-3000i can be auto discovered using Zeroconf, while the
PIX-3000xNT will still utilize the Lantronix utility for discovery. The
following diagram illustrates the TS-3000i functionality with ATVS.
Figure 6-1: ATVS Software & TS-3000i
When using ATVS with the TS-3000i clocks, ATVS will take over control
of the following functions at the clock so they do not have to be setup in
the clock;