User manual

Time Guardian v4.0 User’s Guide 4-37
• A Door schedule requires you to enter the amount of time a door will remain open after
each swipe. This is entered in the Relay Duration field.
• A Bell schedule requires you to enter the duration, time of day, and weekly schedule for the
bell to ring. Multiple entries can be made for Bell schedules with different duration and day
assignments.
Once all schedules have been created and saved, the “Assign Relay Schedule” tab will become
active. This tab is divided into two sections. To the left, the Relay Name list contains all of the
schedules. To the right, the Terminal Number List contains all terminals currently active in the
system as shown in the following example:
To assign a schedule to a terminal, highlight the schedule name and select the Assign button.
That schedule will then appear under the terminal. To remove an assigned schedule, highlight
the name under the terminal and hit the delete key on the keyboard.
Advanced Setup Wizard Login Tab (Profile Definition)
There are three possible levels of Access Rights, controlled by the two check boxes marked
Administrator and Read-Only. The following describes the access rights given to users based
upon checkbox selection:
• Administrator Checkbox selected: Grants the full ability to add, modify and edit any data
contained in the system, including all employee and Time Guardian user login data.