User manual

4-28 Time Guardian v4.0 User’s Guide
To configure terminals connected to the system, click on the button, and the
Communications settings screen will appear. If you are configuring a networked Ethernet
terminal, obtain the correct IP address from your network administrator to enter the IP address
in the Location tab screen.
Location Tab - Clock
A Location tab on the Communication Settings screen enables Time Guardian to communicate
with your terminals. Only one terminal type can be used per Location. If you have more than
one terminal type, you must configure multiple Locations.
To create a new Location, click on the New Location button, and enter the following:
• Location Name: Enter a unique name that will be used to describe the area or site where a
terminal or a group of terminals is located.
• Terminal Type: Select the terminal you are using. The choices are: MTX-5 (previous Time
Guardian), HandPunch 50e/1000/1000e/2000, HandPunch 3000/3000e, or RSI HandPunch
4000 (can use other HandPunches but must use a similar predefined one as a template),
MTX-15, and FINGERPRINT-T4.