User manual

Time Guardian v4.0 User’s Guide 9-5
QS 4: Adding, Deleting & Modifying Time Guardian Backup Schedule
A Backup schedule can be created when the software is first installed, or by adding it later by
following the steps below.
Adding a Backup Schedule
1. Open the Backup module by using either of the two following methods:
a. 1
st
b. 2
method: Select Setup from the Main Menu, pull down to the Wizard submenu, click
on the Login tab.
nd
method: Click the Wizard icon located on the Custom Toolbar, and click on the
Login tab.
2. Select Yes to the question “Do you want to create an automatic backup schedule?” and the
Backup icon will become active. Click on the Backup
icon and the following screen will
appear:
3. Select the day that you would like to start the Backup from the dropdown menu.
4. Enter the number of historic Backup files to be created and rotated (1 – 25).
5. Enter the Backup location by browsing to where you want it stored.
6. Click on the
button to save backup settings, and exit the module.
Deleting a Backup Schedule
1. Open the Login tab (see above).
2. To cancel the Backup entirely, select “No” to the question “Do you want to create an
automatic backup schedule?”
3. Click the
to finish no backup selection, and exit the Wizard.
Modifying a Backup Schedule
1. Open the Backup module (see above).
2. Select Yes to the question “Do you want to create an automatic backup schedule?”
3. To modify the start day of the Backup, click on the dropdown arrow and select a new day.
4. To modify the number of Backup files to be created (1 – 25), enter the modified number.
5. Click the
button to save new backup settings, and exit the backup module.