Specifications

FPT-40 Installation & Operation Guide Page 1-3
  - power ON/OFF button.
  or  - to scroll down or up for menu operations.
Note: Press the Power ON/OFF
 button to turn off the terminal.
Figure 1-1 FPT-40 Fingerprint Terminal Front View
Before Installing FPT-40 Fingerprint Terminal
 Before installation, please make sure the unit is not connected to
power. Connect the power to the unit as the last step
.
 The recommended proper height to mount the device is 55 – 60 "
(1.4 – 1.5 meters).
 Use only the AC adapter provided. Use of another AC adapter may
damage the unit and void the warranty.
 Before connecting the device, please read and follow the installation
instructions. Failure to do so could cause equipment failure; Amano
is not responsible for any damages.
 Please use the enclosed cable [either 6ft Ethernet, or 50 ft USB-to-
Serial cable to connect the FPT-40 Fingerprint terminal. If longer
serial cables for direct connect are required please consult Amano.