Specifications

Page 4-4 FPT-40 Installation & Operation Guide
Voice Test
This will test the voice prompts stored in the FPT-40 Fingerprint terminal.
Press OK to play the selected voice prompt (see figure).
Voice Test
Pla
y
Voice 1.
ESC OK
Figure 4-8 Voice Test 1
Press OK to perform each of the 10 voice tests, or press ESC to exit the
test and return to the Auto Test menu. The voice test responses are:
Voice 1 = "Thank you"
Voice 2 = "Incorrect password"
Voice 3 = "Access denied"
Voice 4 = "Invalid ID"
Voice 5 = "Please try again"
Voice 6 = "Re-enter ID"
Voice 7 = "The clock is full"
Voice 8 = "The clock is full"
Voice 9 = "Duplicate finger"
Voice 10 = "Punch accepted, thank you"
FP Reader Test
This will test the FP reader in the FPT-40 Fingerprint terminal and
indicate the functional status. Select FP Reader test, and press OK to
perform test. The test will display OK! if the reader status is operational
(see figure). Press OK or press ESC to return to the Auto Test menu.
FP Reader
OK !
ESC OK
Figure 4-9 FP Reader OK