Specifications

Page 4-2 FPT-40 Installation & Operation Guide
3. Press OK to display the Auto Test menu (see Figure 4-3).
Auto Test
Run All Test
FLASH Test
LCD Test
Figure 4-3 Auto Test Menu
4. Use the down  or  up arrow buttons to select the desired test,
and press OK to run that test (see Figure 4-4 for an example of LCD
test).
WWWWWWWWWWW
WWWWWWWWWWW
WWWWWWWWWWW
WWWWWWWWWWW
Figure 4-4 LCD Test Screen
5. Follow the on screen prompts. All the tests, except the LCD test,
require you to press ESC or OK at their completion. The LCD test
requires that you press OK to step through each phase of the test.
Run All Test
Select this test to run all six of the built-in diagnostic tests in the following
order; FLASH Test, LCD Test, Voice Test, FP Reader, Key Test, and
RTC Test. At the completion of each test press OK to move to the next
test or press ESC to abort testing and return to the Auto Test menu.
Auto Test
Run All Test
FLASH Test
LCD Test
Figure 4-5 Run All Tests