Specifications

Page 1-2 FPT-40 Installation & Operation Guide
Unpacking Your FPT-40 Terminal
In addition to this guide, your FPT-40 terminal package should include
the following:
 Fingerprint Data Collection Terminal
 AC Adapter
 USB-to-serial connector (RJ-11) with 50ft cable
 6 foot Ethernet cable
 Terminal mounting plate and hardware
 Time Guardian/FPT-40 Quick-Start Guide (A843 package only)
 Time Guardian CD (A843 package only)
 Spare sensor lens/prism (see Replacing Optical Sensor Lens).
Locate this item and store in a safe place for possible
future use!! DO NOT DISCARD.
Understanding the FPT-40 Terminal Front Panel
The front panel of the FPT-40 Fingerprint terminal (see Figure 1-1)
contains the following controls:
 LEDs: During normal standby operation (power on), the Green
LED will flash once per second, and stay on momentarily when a
user successfully verifies. If a user fails to verify, the Red LED will
momentarily stay on.
Note: If the fingerprint reader does not follow the standard LED
operational parameters, please consult support.
 Speaker: Provides audible voice verification of operations, i.e.,
"Thank you", "Incorrect Password", "Access Denied", "Invalid Id",
"Please try again", etc. See Advanced Options on page 2-39 for
voice control.
 LCD Screen: Displays time, date, day, and operational information.
 Fingerprint Sensor: Enrolls (creates) template and verifies
fingerprint.
 Keypad: Used to input User ID, password, and perform menu
operation with the following keys:
 ESC – to perform exit, cancel, ignore when using the Menus.
 MENU – to access Menu structure.
 OK – to confirm and/or save selection.