Specifications

Page 3-10 FPT-40 Installation & Operation Guide
Step 21. To update the terminal settings, click on the Apply button. This
will download the current settings in this window to the
terminal.
Time & Attendance Software Communications Module
With the Time & Attendance Software open on the host PC, from the tree
view, click on the Communications module within the Daily Activities
group and the following type of screen should appear for the Time
Guardian Plus. Note – the tree view can look a little different depending
upon which modules are activated and/or whether it is Time Guardian
Pro (all modules will be active). The figure below shows the tree view for
Time Guradian with all modules activated.
Figure 3-9: Time & Attendance Software Tree View
Locations are selected by clicking on the desired row (see highlighted
example in Figure 3-9). You can select multiple locations by holding
down the Ctrl Key and clicking on other locations. Also, you can sort the
displayed Locations list by clicking on the dropdown list in the upper left-
hand corner and selecting on; Name, Description, Term Type, TZ Offset,
Connection, IP, Port, COM Port, Baud Rate, Modem, and Phone. Once
the location is selected use the following commands found at the bottom
of the screen to communicate with the connected FPT-40 terminal(s) at
that location: