Specifications

Page 3-8 FPT-40 Installation & Operation Guide
Figure 3-6 Setup for Locations with Terminals Tab
Step 11. The Ethernet and direct connection FPT-40 terminals in this
location should appear in the Terminals list (see figure).
Step 12. Double-click on the found terminal or highlight the terminal and
click on the Add button to add a new Terminal to the Location
and the Terminal window General tab will appear for setup.
Figure 3-7 Software General Terminal Setup
Step 13. In the Name field, enter in a unique name [required field] that
will be used to describe the terminal. This field will be
automatically populated with the MAC address when the
eyeglass button is used.