Specifications

Page 3-6 FPT-40 Installation & Operation Guide
To create a new Location in Time & Attendance software for
FPT-40 terminal:
Step 1.
Click the Add button to create a new Location. You will be
required to enter a unique Name [yellow required field] that will
be used to describe the area or site where a terminal or group
of terminals is located.
Step 2. In the Description field, enter a brief description of the
Location. This field is optional.
Step 3. In the Term Type field; select FPT-40.
Step 4. In the TZ (Time Zone) Offset field, select the time zone
difference (if applicable) between the physical location of your
PC and the FPT-40 terminals.
Step 5. In the Output Path field, enter the path of the output XML file.
If necessary, press the Browse button to navigate to the
location of the XML output file.
Step 6. If necessary, check the “Secondary Output File” box, and In
the Output Path field, enter the path of the secondary output
file. Press the Browse button to navigate to the location of the
secondary output file.
Step 7. Click on the Override DLS for DLS (Daylight Savings Time )
Settings override and enter the following:
 Start Date: The date that the DLS period will begin.
 Start Time: The time of the day of the Start Date that the
DLS period will begin.
 End Date: The date that the DLS period will end.
 End Time: The time of the day of the End Date that the
DLS period will end.
Press the Reset button to Reset the DLS at the Terminal.
Step 8. From the Locations screen click on the Connection tab.