Specifications

Page 3-4 FPT-40 Installation & Operation Guide
Special Note: Selecting Holidays will only work with HandPunches
(all HandPunch models).
The FPT-40 terminal does not contain the capability to
ring bells, but you may have a configuration which
includes other terminals such as the MTX-15 or
HandPunch that does have relays for bell ringing.
A Bell schedule requires you to enter the Duration for the bell to ring, the
time of day for the bell to ring and the days of the week. Multiple entries
can be made for Bell Schedules with different duration and day
assignments. Bell Schedules are downloaded to the selected terminals
by location by using the Communications module in the Time &
Attendance Software. To do so, see the next section and/or Time &
Attendance Software User Guide for more details.
Do you want to configure Terminals?
Answer Yes to this question if you are using terminals such as a FPT-40
terminal via a serial (driect) or Ethernet (network) connection.
Direct (serial) Connection
If Yes is selected, and a Direct connection
using the included 50 foot
USB/serial cable is desired, you can just use the “FPT-40 Default”
location. You do not have to do anything else. The FPT-40 terminal, if
connected, will automatically be detected upon login.
Note: The default terminal connection is for a USB (serial-direct)
FPT-40 Terminal.
Ethernet (network) Connection
If Yes is selected, and you are installing an Ethernet connection
for the
FPT-40 click on the Location/Terminal
button
(see Figure 3-1) and the Locations screen will appear.
 Select “FPT-40 Default” on the General tab
from the dropdown
menu for Locations [recommended for easy configuration].
 Click on Connection tab
to select Ethernet for Connection Type and
enter your IP Address. The default FPT-40 Location automatically
defines everything else for Ethernet. Click on
button.