Specifications

FPT-40 Installation & Operation Guide Page 3-3
Terminal Validation is used to assign employees and Labor Levels to
specific FPT-40 terminals in the system. When validation is used, only
employees assigned to a particular terminal with the selected Labor
Levels can use that terminal. Labor transfers at the terminal can only
occur within the selected Labor Levels. Terminal Validations are
downloaded to the selected FPT-40 terminals by location from the
Communications module. To do so, see the Time & Attendance Software
User Guide for more detailed information:
Figure 3-2 Software Setup for Terminal Validation
Do you want to configure Bell Schedules?
If Yes is selected for Bell Schedules, click the Bell Schedule button for
the Bell Schedules screen (see Figure 3-3).
Figure 3-3 Software Setup for Bell Schedules