Specifications

Page 2-46 FPT-40 Installation & Operation Guide
3. Press OK to display the Log Opt menu (see Figure 2-112).
Log Opt
Alm SuperLog 99
Alm AttLog 99
ReCheck Min 0
Figure 2-112 Log Options Menu
4. Select the desired option. For log options, press OK and use the
numeric keypad and/or “▲/▼” to enter/select the desired value (see
figure for example). For all Log options, pressing ESC will return to
the default value/state and exit to the Log Opt menu.
Follow this example to enter the ReCheck Min:
1. From the Log Opt menu, select ReCheck Min (see figure), and press
OK.
Log Opt
Alm SuperLog 99
Alm AttLog 99
ReCheck Min 0
Figure 2-113 Log Opt Menu – ReCheck Min
2. Enter the ReCheck Min time (see Figure 2-113) by using the “▲/▼”
buttons or the keypad to move between minutes [the range is 0 to
99] for time entry.
3. Once the desired ReCheck Min is set, press OK to save and return
to the Log Opt menu.
Auto Test
This option is designed to run assorted tests on the unit to analyze a
failure for quick and easy maintenance. These tests check such things
as the memory, LCD display, sound, fingerprint sensor, keypad, and
clock. During these tests the power should be maintained to prevent any
hardware damage; especially during the memory test. See Running
Diagnostics on page 4-1 for additional information and operational
details.