Specifications

Page 2-42 FPT-40 Installation & Operation Guide
4. Press “▲/▼” to scroll up or down the screen to select the desired
option. For Power Management options Idle & Lock Power, press
OK and use “▲/▼” to enter the desired state. For all other power
management options, press OK and use the numeric keypad and/or
“▲/▼” to enter the desired value (see figure for example). For all
power management options, pressing ESC will return the default
value/state, and exit to the Power Mng menu.
Follow this example to set the shutdown time:
1. Press OK from the Power Mng menu, with Shutdown selected
(see figure).
Power Mng
Shutdown N
PowerOn N
Sleep N
Figure 2-103 Select Shutdown Time
2. Press OK to enter shutdown time of day in 24 hour format (see
Figure 2-104). Use “▲/▼” to move between hours and minutes and
the keypad to enter time.
Power Mng
Shutdown
PowerOn N
Sleep N
23 : 59
Figure 2-104 Shutdown Screen
3. Once the desired shutdown time of day in 24H format is set, press
OK to exit and display the Power Mng menu (see Figure 2-102).
Communications Options Menu
Use the Comm Opt menu at the FPT-40 terminal to set:
 BaudRate: The default is "115200". The five (5) communications
speed options are; 115200, 57600, 38400, 19200, and 9600. The
value must be set consistent with the communications ports of the
Time & Attendance software host PC.