Specifications
FPT-40 Installation & Operation Guide Page 2-39
Advanced Options (Adv Option) Menu
Use the Adv Option menu at the FPT-40 terminal to:
Reset Opts.: selecting this command will restore all setup
information in the terminal to the factory default settings.
Del AttLogs: selecting this command will delete all user logs from
the flash memory.
Clear All Data: selecting this command will delete all enrolled user
information including templates, passwords and logs from the flash
memory of the terminal. The Time & Attendance software can be
used to restore this information from the "Fingerprint Commands"
(see page 3-12).
Clear Admin Pri: selecting this command will clear all administrative
privileges currently set in the terminal and reset all user privileges to
ordinary users.
Show Score: selecting this command will set whether or not to
display a quality value for the fingerprint template on the LCD
screen.
Match Thr: selecting this command sets the threshold level for a
one-to-many match, see Table 2-1. A one-to-many threshold is used
to compare the finger template to the database of user templates to
determine the user (ID) that just punched.
Mst Input ID: selecting this command sets whether or not [Y or N] if
you must
enter your User ID when punching. When this command is
set to Y, all users are compared with a 1:1 match to their ID with their
finger template or password.
1:1 Thr: selecting this command sets the one-to-one threshold level
when comparing an ID to a fingerprint or password.
Voice: selecting this command is used to set (Y), so the terminal will
produce an audible prompt sound for every operation. For example,
after a successful verification, the machine will say ("Thank you"). If
the Voice is set to (N) the machine will not produce an audible
prompt, but instead just beep once to signify a sucessful verification.
In this instance, if the verification was negative, the machine will
beep twice.
Adj VOL(%): selecting this command will adjust the voice speaker
volume for audible prompts.
To set Advanced Options:
1. From the System Opt menu select Adv Option (see figure).