Specifications

Page 2-38 FPT-40 Installation & Operation Guide
MM - DD 24H
3 - 09 2:00
ESC OK
Figure 2-95 DST Start Date/Time
Note: The DST Start and End time format is fixed as a 24H format.
5. Select DST End, and press OK to enter the end date/time for DST
(see figure for example). Use the  or  buttons to move between
choices and the keypad to enter values. Press OK to save or ESC to
exit with default settings.
MM - DD 24H
10 - 02 2:00
ESC OK
Figure 2-96 DST End Date/Time
Note: The FPT-40 Fingerprint terminal will utilize these settings to
adjust the terminal's future clock time based upon the DLS
date settings. However, the Time & Attendance software DLS
settings (see figure) will have precedent when the “Override
DLS” box is enabled [checked].
Figure 2-97 Time & Attendance Software DLS Settings