Specifications

FPT-40 Installation & Operation Guide Page 2-37
2. Press OK to highlight the display format setting. Use the  or 
buttons to select one of the formats, which are; YY-MM-DD,
YY/MM/DD, YY.MM.DD, MM-DD-YY, MM/DD/YY, MM.DD.YY, DD-
MM-YY, DD/MM/YY, DD.MM.YY, or YYYYMMDD.
3. Press OK to save the selection, or press ESC to keep the default.
Note: This format does not change the date format of the FPT-40
terminal, as it only changes the terminal display format.
How to Set Daylight Saving (DLS) Time
Use this function to set the Daylight Saving (DLS) Time start/end dates
and times at the FPT-40 terminal with the following procedure:
1. From the System Opt menu select DLS Settings (see figure).
System Opt
Language ENG
Fmt MM-DD-YY
DLS Settings
Figure 2-93 Selecting DLS
2. Press OK to display the DLS Settings menu (see Figure 2-94) and
select DLS Settings.
DLS Settings
DLS Settings Y
DST Start
DST End
Figure 2-94 DLS Settings
3. Press OK to highlight the setting and select Y or N. Press OK to
save the selection.
4. Select DST Start, and press OK to enter the begin date/time for DST
(see figure for example). Use the  or  buttons to move between
choices and the keypad to enter values. Press OK to save or ESC to
exit with default settings.