Specifications

Page 2-36 FPT-40 Installation & Operation Guide
Setting the Display Time Format
From the System Opt menu select Time Format, and then choose 24H
for military time, or 12H for AM/PM time format. The default time format
is 12H. The display time format can be set at the terminal or downloaded
from the Time & Attendance software, which should be set in the same
time format as the terminal.
Note: This format does not change the time format of the FPT-40
terminal, as it only changes the terminal display format.
Setting the Language
1. From the System Opt menu select Language (see Figure 2-91).
System Opt
Date Time
Time Format 12H
Language ENG
Figure 2-91 System Options Language
2. Press OK to highlight the current Language. Use the  or  buttons
to move between choices, which are; English or Spanish.
3. Press OK to save the selection, or press ESC to keep the default
selection; which is English. You must restart the terminal for the
selected language to take effect.
Setting the Display Date Format
The default display date format is MM/DD/YY.
1. From the System Opt menu select Fmt [format] (see Figure 2-91).
System Opt
Date Time
Language Eng
Fmt MM/DD/YY
Figure 2-92 Date Format