Specifications

Page 2-26 FPT-40 Installation & Operation Guide
Note: The FPT-40 Fingerprint terminal will not allow duplicate finger
enrollment for the same or even different User IDs. You must
enroll a different finger.
7. After the 3
rd
successful finger press, the display will show the 5-digit
User ID followed by “– 0” (see figure) to indicate that the first (0)
finger template has been created for this ID.
New Enroll
00028-0
ESC OK(Save)
Figure 2-66 Save User ID with FP Template
8. Press OK to save the finger template, and the system will prompt to
continue with another new enrollment (see figure) for the next User
ID.
Note: At this time if you press ESC you will exit New FP enrollment
and enter the Backup Enroll mode. This mode can be used to
create an additional finger template for the User ID. A backup
finger is recommended as an alternate identification resource.
New Enroll
Continue?
ESC OK
Figure 2-67 Continue FP Enrollment
9. Press ESC to initiate Backup Enroll to add a second finger template
for this User ID.
Backup Enroll
Continue?
User ID 00028
ESC OK
Figure 2-68 Backup Enroll User ID Screen