Specifications

Page 2-16 FPT-40 Installation & Operation Guide
5. Press ESC to change the password and Chg Password User ID will
appear to accept/enter the User ID (see figure). Use the keypad
and/or the  or  buttons to select the desired User ID. Press ESC
to exit and return to the Enroll User menu.
Note: If an unknown User ID is entered, the warning "No Enroll!" will
appear.
Ch
g
Password
UserID 00001
ESC OK
Figure 2-33 Change Password Select User ID
6. Press OK to input the replacement password [the range is 1 to
65534] using the keypad. Press ESC to abort changing the password
and return to the Enroll User menu.
Ch
g
Password
Input Pwd _
ESC OK
Figure 2-34 Change Password - Input Pwd
7. Repeat the password entry to affirm (see figure).
Ch
g
Password
Input Pwd *****
Pwd Affirm_
Figure 2-35 Change Password - Affirm
8. Press OK to save the changed password. The User ID will have a
"-P" after it to indicate a password has been created (see figure).