Specifications

FPT-40 Installation & Operation Guide Page 2-13
6. Press OK to proceed with New Enroll for password, and input the
password [the range is 1 to 65534] using the keypad (see figure).
Press OK to enter the password if less than 5 digits. Press ESC to
exit and return to the Enroll User menu.
New Enroll
Input Pwd xxxxx
ESC OK
Figure 2-23 New Enroll Input Pasword
7. Repeat the password entry to affirm (see figure).
New Enroll
Input Pwd xxxxx
Pwd Affirm _
Figure 2-24 Affirm Password
8. Press OK to save password for the User ID. After password entry,
the User ID will have a “dash P” to indicate that a password has
been created (see figure).
New Enroll
00006-P
ESC OK(Save)
Figure 2-25 Save Password for User ID
9. Press OK to continue entering a password for the next User ID
(see figure), or press ESC to change the password. See How to
Change a User Password with Backup Enroll on page 2-14 for more
details on changing a password.