Specifications

Page 2-10 FPT-40 Installation & Operation Guide
6. Press OK to proceed and display "New Enroll Place Finger…"
(see figure). Follow the on screen prompts for a total of 3 finger
presses to complete the process, or press ESC to exit to the Enroll
User menu.
New Enroll
04535-0
Place Finger
ESC/Exit
+ + +
Figure 2-14 Place Finger 1st Pass
Note: The system may prompt you with voice and on screen
warnings if errors in the FP enrollment process occur. For
example, if that ID already has the same finger enrolled, the
voice prompt will say "Duplicate Finger" while the screen will
display "FP Enrolled Alrd" [for fingerprint enrolled already].
Note: The system will not
allow duplicate enrollment of the same
finger for the same or different User IDs. You must enroll a
different finger.
7. After the 3
rd
successful finger press, the display will show the User ID
followed by “ – 0” (see figure) to indicate that one (1) finger template
exists for this ID.
New Enroll
00002-0
ESC OK(Save)
Figure 2-15 Save User ID with FP Template
8. Press OK to save the finger template, and the system will prompt to
continue for another user enrollment (see figure).
Note: At this time if you press ESC you will exit New FP enrollment
and enter the Backup Enroll mode. This mode can be used to
create more than one (1) finger template for a User ID. A
backup finger is recommended as an alternate identification
resource.