Specifications

FPT-40 Installation & Operation Guide Page 2-9
3. Press OK to display the Enroll User menu and select Enroll FP
(see Figure 2-11). The possible enrollment choices using the  or
 buttons are; FP = fingerprint, Pwd = password only, and FP &
Pwd = fingerprint & password).
Enroll User
Enroll FP
Enroll Pwd
FP & Pwd
Figure 2-11 Enroll User Menu
4. Press OK and Enroll FP New Enroll? will appear (see Figure 2-12).
Enroll FP
New Enroll ?
ESC OK
Figure 2-12 New Enroll FP Screen
Note: If this is the first User ID the display will show "New Enroll User
ID 00001". Pressing ESC at this step will place the terminal
into the Backup Enroll mode (see How to Enroll Multiple
Fingers for a User on page 2-21).
5. Press OK to begin enrollment, and New Enroll User ID will appear to
accept/enter the User ID (see figure). Enter the User ID using the
keypad and/or the  or  buttons. Press ESC to exit and return to
the Enroll User menu.
New Enroll
User ID 00002
ESC OK
Figure 2-13 New Enroll User ID Screen
Note: The default User ID is 5 digits, so any number less than 5
digits will have zeros in front of it, i.e., if the number is 2, 00002
will be displayed. The User ID will auto-sequence each new
User ID + 1 digit. [the range is 00001 to 65534].