Specifications

Page 1-10 FPT-40 Installation & Operation Guide
 Press the power On/Off  button to shutdown the FPT-40
Fingerprint terminal and display "halting system….Shutdown 2 secs,
1sec". The FPT-40 terminal will retain all templates and transactions
while the power is off. See Power Management Menu on page 2-40
for additional information on configuring the terminal for auto-sleep
and wake up functions.
 If necessary additional diagnostic tests can be performed to confirm
the unit is performing properly (see Running
Diagnostics on page
4-1).
Normal Punch IN/OUT Display
The system is ready to use after the FPT-40 terminal and the host PC
with the Time & Attendance software are connected and setup. Upon
recognition at the terminal, the terminal will first briefly display his/hers
name [first 8 characters of the first and last name combined], followed by
the User ID and validation status (see figure).
Verify
John Doe
User ID 00001
Verified.
Figure 1-8 Validation Screen
Next, the terminal will display the "As of" date followed by the current pay
period hours worked for the user that just punched in (see figure for
example).
Figure 1-9 Hours Worked for Pay Period
Note: The current pay period information is transferred from the Time
& Attendance software to the terminal during a download and
can be retained at the terminal for up to 14 days between
downloads.