Specifications

Page 1-6 FPT-40 Installation & Operation Guide
Communication Connections
A connection between your Host PC with the Time & Attendance
software and the FPT-40 terminal(s) is/are based upon your setup.
Serial Connection (Direct Connect)
You should use the Amano CommStik™ [part number AUS-10035x] (50
foot RJ-11 to USB) Communications Cable (included) to interface with
the host PC and Time & Attendance software.
RS-485 communications can be used for systems requiring up to 31
terminals. You will require the following accessories for each
additional
RS-485 terminal:
 AMX-206950: Communications Cable – 10’, 6 conductor RJ-11
 AMX-206700: Junction Box
Figure 1-3 Serial Direct Connection with CommStik
Note: If the distance between the terminal and the host PC is more
than 50 feet, two junction boxes will be required.
Time & Attendance
Software
PC Host