User guide

Time Guardian Series – Setup Wizard 3-45
Employees AmanoNet
This is part of an optional Access Control Module which requires activation to utilize. Use to
setup access control integration with PIN numbers and/or tags for each employee. See the
Access Control Integration section for additional configuration information.
After completing the entry/selection of information for Step 7: Employee Setup, click on the
Next button to continue to Step 8: Terminal Setup.
Step 8: Clock Setup Wizard [Optional]
Note: Prior to commencing this step, it is recommended you install your terminal, using the
appropriate terminal installation guide. The terminal is installed to communicate with the
host PC. The installation guide will provide the necessary steps to install the terminal.
You may need to obtain the IP address for each Ethernet terminal(s) connected to the
system.
Step 8: Clock Setup is optional; use this step only if:
• The company doesn’t have access system
• The company doesn’t want the Time Attendance System to be integrated with Access
Control System.
• The company has an access system, but wants to use a different device(s) for Time
Attendance.
Do you have Terminal(s) other than Access Control Terminal(s)?
If Yes, the Time & Attendance software will automatically poll and upload punches from
connected terminals each time the software is opened.